PathPing

PathPing
	The PathPing command
Developer(s)	Microsoft
Initial release	February 17, 2000; 24 years ago
Operating system	Microsoft Windows
Type	Command
License	Proprietary commercial software
Website	docs.microsoft.com/en-us/windows-server/administration/windows-commands/pathping

The PathPing command is a command-line network utility included in Windows NT operating systems since Windows 2000 that combines the functionality of ping with that of tracert.^[1] It is used to locate spots that have network latency and network loss.^[2]^[3]

Overview

The command provides details of the path between two hosts and ping-like statistics for each node in the path based on samples taken over a time period, depending on how many nodes are between the start and end host.

The advantages of PathPing over ping and traceroute are that each node is pinged as the result of a single command, and that the behavior of nodes is studied over an extended time period, rather than the default ping sample of four messages or default traceroute single route trace. The disadvantage is that it takes a total of 25 seconds per hop to show the ping statistics.^[4]

Syntax

The command-syntax is:^[5]

 pathping [-g host-list] [-h maximum_hops] [-i address] [-n]
          [-p period] [-q num_queries] [-w timeout] [-P] [-R] [-T]
          [-4] [-6] target_name

Options:

-g host-list Loose source route along host-list.
-h maximum_hops Maximum number of hops to search for target.
-i address Use the specified source address.
-n Do not resolve addresses to hostnames.
-p period Wait period milliseconds between pings.
-q num_queries Number of queries per hop.
-w timeout Wait timeout milliseconds for each reply.
-P Test for RSVP PATH connectivity.
-R Test if each hop is RSVP aware.
-T Test connectivity to each hop with Layer-2 priority tags.
-4 Force using IPv4.
-6 Force using IPv6.

Sample

>pathping wikipedia.org

Tracing route to wikipedia.com [207.142.131.235]
over a maximum of 30 hops:
  0  simonslaptop [192.168.0.11] 
  1  192.168.0.1 
  2  thus1-hg2.ilford.broadband.bt.net [217.32.64.73] 
  3  217.32.64.34 
  4  217.32.64.110 
  5  anchor-border-1-4-0-2-191.router.demon.net [212.240.162.126] 
  6  anchor-core-2-g0-0-1.router.demon.net [194.70.98.29] 
  7  ny1-border-1-a1-0-s2.router.demon.net [194.70.97.66] 
  8  ge-8-0-153.ipcolo1.NewYork1.Level3.net [209.246.123.177] 
  9  ae-0-51.bbr1.NewYork1.Level3.net [64.159.17.1] 
 10  so-2-0-0.mp1.Tampa1.Level3.net [209.247.11.201] 
 11  ge-6-0.hsa2.Tampa1.Level3.net [64.159.1.10] 
 12  unknown.Level3.net [63.208.24.2] 
 13

Computing statistics for 325 seconds...
            Source to Here   This Node/Link
Hop  RTT    Lost/Sent = Pct  Lost/Sent = Pct  Address
  0                                           simonslaptop [192.168.0.11] 
                                0/ 100 =  0%   |
  1    0ms     0/ 100 =  0%     0/ 100 =  0%  192.168.0.1 
                                0/ 100 =  0%   |
  2   18ms     1/ 100 =  1%     1/ 100 =  1%  thus1-hg2.ilford.broadband.bt.net  [217.32.64.73]  
                                0/ 100 =  0%   |
  3   18ms     0/ 100 =  0%     0/ 100 =  0%  217.32.64.34 
                                0/ 100 =  0%   |
  4   21ms     0/ 100 =  0%     0/ 100 =  0%  217.32.64.110 
                                0/ 100 =  0%   |
  5   21ms     1/ 100 =  1%     1/ 100 =  1%  anchor-border-1-4-0-2-191.router.demon.net [212.240.162.126] 
                                0/ 100 =  0%   |
  6  ---     100/ 100 =100%   100/ 100 =100%  anchor-core-2-g0-0-1.router.demon.net [194.70.98.29] 
                                0/ 100 =  0%   |
  7  ---     100/ 100 =100%   100/ 100 =100%  ny1-border-1-a1-0-s2.router.demon.net [194.70.97.66] 
                                0/ 100 =  0%   |
  8  100ms     0/ 100 =  0%     0/ 100 =  0%  ge-8-0-153.ipcolo1.NewYork1.Level3.net [209.246.123.177] 
                                5/ 100 =  5%   |
  9   94ms     5/ 100 =  5%     0/ 100 =  0%  ae-0-51.bbr1.NewYork1.Level3.net [64.159.17.1] 
                                0/ 100 =  0%   |
 10  134ms     7/ 100 =  7%     2/ 100 =  2%  so-2-0-0.mp1.Tampa1.Level3.net [209.247.11.201] 
                                0/ 100 =  0%   |
 11  137ms     6/ 100 =  6%     1/ 100 =  1%  ge-6-0.hsa2.Tampa1.Level3.net [64.159.1.10] 
                               30/ 100 = 30%   |
 12  131ms    41/ 100 = 41%     6/ 100 =  6%  unknown.Level3.net [63.208.24.2] 
                               59/ 100 = 59%   |
 13  ---     100/ 100 =100%     0/ 100 =  0%  win2000 [0.0.0.0]

Trace complete.

>pathping -q 10 wikipedia.org^[6]

Tracing route to wikipedia.org [66.230.200.100]
over a maximum of 30 hops:
  0  Aaron.hsd1.mn.comcast.net. [192.168.11.3]
  1  air.setup [192.168.11.1]
  2  73.127.68.1
  3  ge-1-38-ur01.minnetonka.mn.minn.comcast.net [68.86.234.41]
  4  68.86.232.37
  5  68.86.232.33
  6  68.86.232.5
  7  68.86.232.1
  8     *     12.116.99.41
  9  tbr2.cgcil.ip.att.net [12.122.99.70]
 10     *     ggr2.cgcil.ip.att.net [12.123.6.69]
 11  ar1-a3120s2.wswdc.ip.att.net [192.205.34.6]
 12  66.192.247.163
 13  ge8-13.csw5-pmtpa.wikimedia.org [66.193.50.242]
 14     *     rr.pmtpa.wikimedia.org [66.230.200.100]

Computing statistics for 35 seconds...
            Source to Here   This Node/Link
Hop  RTT    Lost/Sent = Pct  Lost/Sent = Pct  Address
  0                                           Aaron.hsd1.mn.comcast.net. [192.168.11.3]
                                0/  10 =  0%   |
  1    0ms     0/  10 =  0%     0/  10 =  0%  air.setup [192.168.11.1]
                                0/  10 =  0%   |
  2    8ms     0/  10 =  0%     0/  10 =  0%  73.127.68.1
                                0/  10 =  0%   |
  3    8ms     0/  10 =  0%     0/  10 =  0%  ge-1-38-ur01.minnetonka.mn.minn.comcast.net [68.86.234.41]
                                0/  10 =  0%   |
  4    9ms     0/  10 =  0%     0/  10 =  0%  68.86.232.37
                                0/  10 =  0%   |
  5    8ms     0/  10 =  0%     0/  10 =  0%  68.86.232.33
                                0/  10 =  0%   |
  6   12ms     0/  10 =  0%     0/  10 =  0%  68.86.232.5
                                0/  10 =  0%   |
  7    8ms     0/  10 =  0%     0/  10 =  0%  68.86.232.1
                                0/  10 =  0%   |
  8  ---      10/  10 =100%    10/  10 =100%  12.116.99.41
                                0/  10 =  0%   |
  9   20ms     0/  10 =  0%     0/  10 =  0%  tbr2.cgcil.ip.att.net [12.122.99.70]
                                0/  10 =  0%   |
 10   18ms     2/  10 = 20%     2/  10 = 20%  ggr2.cgcil.ip.att.net [12.123.6.69]
                                1/  10 = 10%   |
 11  ---      10/  10 =100%     9/  10 = 90%  ar1-a3120s2.wswdc.ip.att.net [192.205.34.6]
                                0/  10 =  0%   |
 12   44ms     2/  10 = 20%     1/  10 = 10%  66.192.247.163
                                0/  10 =  0%   |
 13   63ms     1/  10 = 10%     0/  10 =  0%  ge8-13.csw5-pmtpa.wikimedia.org [66.193.50.242]
                                0/  10 =  0%   |
 14   63ms     6/  10 = 60%     5/  10 = 50%  rr.pmtpa.wikimedia.org [66.230.200.100]

Trace complete.

>pathping -n wikipedia.org

Tracing route to wikipedia-lb.eqiad.wikimedia.org [208.80.154.225]over a maximum of 30 hops:
 0  192.168.1.102
 1  192.168.1.1
 2  10.202.181.110
 3  10.202.182.109
 4  10.202.181.153
 5  10.202.181.49
 6  212.72.4.97
 7  82.178.32.102
 8  63.218.109.117
 9  63.218.44.38
10  206.111.0.249
11  216.156.8.189
12     *        *        *
Computing statistics for 275 seconds...

Notes and references

^ "PathPing". Microsoft. Archived from the original on 2009-02-25.
^ "MS-DOS and Windows command line pathping command".
^ "Using Pathping". 23 August 2005.
^ PathPing - TechNet, Microsoft
^ PathPing - IP trace - Windows CMD - SS64.com
^ note the shorter wait with only 10 queries per hop instead of the default 100

External links

pathping | Microsoft Docs – Information about the PathPing tool (Microsoft.com)
WinMTR

[1] "PathPing". Microsoft. Archived from the original on 2009-02-25.

[2] "MS-DOS and Windows command line pathping command".

[3] "Using Pathping". 23 August 2005.

[4] PathPing - TechNet, Microsoft

[5] PathPing - IP trace - Windows CMD - SS64.com

[6] te the shorter wait with only 10 queries per hop instead of the default 100

[1]

[2]

[3]

[4]

[5]

[6]

v t e Windows command-line programs and shell builtins
COMMAND.COM Command Prompt Windows PowerShell Recovery Console
File system navigation	cd (chdir) dir popd pushd tree
File management	attrib cacls cipher compact copy del (erase) deltree icacls mkdir (md) mklink move openfiles recover ren (rename) replace rmdir (rd) robocopy takeown xcopy
Archiving	expand extrac32 extract makecab pax tar
Disk management	chkdsk convert defrag diskcomp diskcopy diskpart diskraid diskshadow drvspace fdisk format fsutil label manage-bde refsutil subst scandisk sys vol vssadmin
Processes	at exit kill powercfg runas sc schtasks shutdown start taskkill tasklist
Registry	assoc ftype reg regini regsvr32
User environment	chcp cmdkey date graftabl mode path set setver setx time title ver where whoami
File contents	comp edit edlin fc find findstr print type
Scripting	choice clip cscript doskey echo for forfiles goto if more pause prompt rem timeout
Networking	arp bitsadmin curl getmac hostname ipconfig nbtstat net netsh netstat nslookup PathPing ping rpcping route scp setspn sftp ssh ssh-add ssh-agent ssh-keygen ssh-keyscan tracert winrm winrs
Maintenance and care	auditpol dispdiag driverquery eventcreate eventtriggers logman mofcomp msiexec ntbackup pnpunattend pnputil REAgentC relog sfc sxstrace systeminfo tracerpt typeperf w32tm WBAdmin wecutil wevtutil winmgmt winsat wmic
Boot management	bcdedit bootcfg bootsect fixboot fixmbr
Software development	debug exe2bin QBasic
Miscellaneous	break cls dism dpath gpresult gpupdate help MSCDEX pentnt tpmtool tpmvscmgr wsl
List of DOS commands Environment variables Windows Support Tools

PathPing

Overview

Syntax

Sample

See also

Notes and references

Further reading

External links