Jump to content

Mitsubishi Sirius engine

From Wikipedia, the free encyclopedia
Mitsubishi Sirius engine
Mitsubishi G62B engine
Overview
ManufacturerMitsubishi Motors
Also called4G6/4D6
Production1980–2013 (4G6 & 4D6 Series)
1980–present (4K Series: China)
Layout
ConfigurationInline-four
Displacement1.6 L; 97.3 cu in (1,595 cc)
1.8 L; 109.5 cu in (1,795 cc)
1.8 L; 112.0 cu in (1,836 cc)
2.0 L; 121.9 cu in (1,997 cc)
2.0 L; 121.9 cu in (1,998 cc)
2.4 L; 143.5 cu in (2,351 cc)
2.4 L; 145.1 cu in (2,378 cc)
Cylinder bore80.6 mm (3.17 in)
81.5 mm (3.21 in)
82.3 mm (3.24 in)
82.7 mm (3.26 in)
85 mm (3.35 in)
86.5 mm (3.41 in)
87 mm (3.43 in)
Piston stroke75 mm (2.95 in)
88 mm (3.46 in)
93 mm (3.66 in)
100 mm (3.94 in)
Cylinder block materialCast iron
Cylinder head materialAluminium
ValvetrainSOHC & DOHC, 2 & 4 valves x cyl. with MIVEC on some versions
Combustion
TurbochargerSome versions
Fuel systemCarburetor, Fuel injection
Fuel typeGasoline, Diesel
Cooling systemWater-cooled
Chronology
SuccessorMitsubishi 4B1 engine (4G6 Gasoline engine)
Mitsubishi 4N1 engine (4D6 Diesel engine)

The Mitsubishi Sirius or 4G6/4D6 engine is the name of one of Mitsubishi Motors' four series of inline-four automobile engines, along with Astron, Orion, and Saturn.

The 4G6 gasoline engines were the favoured performance variant for Mitsubishi. The 4G61T powered their Colt Turbo, while the 4G63T, first introduced in the 1980 Lancer EX 2000 Turbo, went on to see service in the Sapporo and Starion coupés during the so-called "turbo era" of the 1980s, before creating for itself an illustrious motorsport heritage as the powerplant under the hood of the World Rally Championship-winning Lancer Evolution. A UK-market Evo known as the FQ400 had a 400 bhp (298 kW; 406 PS) version of the Sirius, making it the most powerful car ever sold by Mitsubishi.

The 4D6 diesel engines supplemented the larger 4D5. Bore pitch is 93 mm.

4G61 (1.6 liters)

[edit]

The 4G61 displaces 1,595 cc (1.6 L) with bore/ full length stroke of 82.3 mm × 75 mm (3.24 in × 2.95 in). This engine was always DOHC 16-valve and used either Multi-point (MPFI) or Electronic Control (ECFI) fuel injection. A turbocharged version was also produced for the Mirage and Lancer. Unlike the other Sirius motors, the 4G61 does not have balance shafts.

Performance

[edit]
  • 4G61 105 hp (78 kW; 106 PS) at 6100 rpm.
  • 4G61T (USA/Canada only) 135 hp (101 kW; 137 PS) at 6000 rpm and 191 N⋅m (141 lbf⋅ft) of torque at 3000 rpm.
  • 4G61T (Japan, early) 145 PS (107 kW; 143 hp) at 6000 rpm and 206 N⋅m (152 lb⋅ft) of torque at 2500 rpm.

  (late) 160 PS (118 kW; 158 hp) at 6000 rpm and 221 N⋅m (163 lb⋅ft) of torque at 2500 rpm.

Applications

[edit]

4G62 (1.8 liters)

[edit]

The larger 1.8 L 4G62 was an SOHC 8-valve unit for longitudinal rear-wheel drive and all-wheel drive use. With a bore and stroke of 80.6 mm × 88 mm (3.17 in × 3.46 in), it displaces 1,795 cc (1.8 L). It was available either in carburetor form, multi-point fuel injection, or ECI Turbo as found in the Lancer EX 1800GSR or 1800GT, and Cordia GSR.

Applications

[edit]

4G62T

[edit]

Turbocharged version of the 4G62

4G63/G63B (2.0 liters)

[edit]
4G63B Cyclone Dash 3x2 in a fifth generation Galant

The 4G63 was a 1,997 cc (2.0 L) version.

Bore x stroke is 85 mm × 88 mm (3.35 in × 3.46 in) SOHC and DOHC were produced. Both versions were available in either naturally aspirated and turbocharged form. For front-wheel drive applications, the turbocharged Sirius' name was changed to "Cyclone Dash". As fitted to the fifth generation Galant 200 PS (147 kW; 197 bhp) JIS gross were claimed - the output claims later shrank to 170 PS (125 kW; 168 bhp) - for the turbocharged and intercooled "Sirius Dash 3x2 valve" engine. This version could switch between breathing through two or three valves per cylinder, to combine high top-end power with low-end drivability as well as allowing for economical operation.[1] It was a modification of Mitsubishi MCA-Jet technology which used a secondary intake valve to inject air into the engine for more efficient emissions control. The DOHC version was introduced in 1987 in the Japanese market Galant, and came in turbocharged or naturally aspirated form. It is found in various models including the 1988-92 Mitsubishi Galant VR-4, the U.S. market 1990-1999 Mitsubishi Eclipse, and the Mitsubishi Lancer Evolution I-IX. Later versions also received Mitsubishi's variable valve timing system, MIVEC.

A SOHC carbureted eight-valve version (engine code G63B) was also available in Mitsubishi's pickup trucks (L200, Strada, Mighty Max, Dodge Ram 50) from the eighties until the mid-nineties. It produces 92 hp (69 kW; 93 PS) at 5500 rpm in European trim (1989).[2] The SOHC version was also used in Mitsubishi Galant models until 1993. It has 76 kW (102 bhp; 103 PS) of output and 157 N⋅m (116 lbf⋅ft) of torque at 4,750 rpm.

Mivec Turbo 4G63 in a Lancer Evo IX

Also, a SOHC version was produced until the late 90s and early 2000s and was used in Mitsubishi cars like the Montero and the 2.0 L 2-door Pajero with an output of 101 kW (137 PS; 135 bhp) at 4700 rpm. Also the N33 and N83 Space Wagons and Galant (UK market) received the 4G63, in single-cam sixteen-valve format. A similar version, with 100 PS (74 kW; 99 bhp), was also used in some light duty Mitsubishi Canters from 1997 on.[3]

The Mitsubishi Eclipse, Eagle Talon and Plymouth Laser introduced the DOHC turbocharged intercooled version to the U.S. in 1989 through Diamond Star Motors, a joint venture between Mitsubishi Motors and the Chrysler Corporation. From 1990 to late April 1992 came thicker connecting rods and the use of six bolts to secure the flywheel to the crankshaft; May 1992 to 2006 Evolution versions have lighter rods and use seven bolts to secure the flywheel to the crankshaft. They are referred to as the "six bolt" and "seven bolt" engines, respectively.

Output for the 2003 US Mitsubishi Lancer Evolution is 202 kW (271 bhp; 275 PS) at 6500 rpm with 370 N⋅m (273 lb⋅ft) of torque at 3500 rpm. It has a cast iron engine block and aluminium DOHC cylinder head. It uses multi-point fuel injection, has four valves per cylinder, is turbocharged and intercooled and features forged steel connecting rods. The final version of the engine was found in Lancer Evolution IX. It was equipped with Mitsubishi's variable valve timing system, MIVEC. This version also had a revised turbocharger, extended reach spark plugs, two-piece rings.

A SOHC 16 valve turbocharged version called 4G63S4T is produced by Shenyang Aerospace Mitsubishi Motors Engine Manufacturing (SAME) in Shenyang, China, producing a peak power of 130 kW (174 hp; 177 PS) and a peak torque of 253 N⋅m (187 lb⋅ft) for most applications, and rated 140 kW (188 hp; 190 PS) in some applications. This version is equipped with a TD04 turbocharger.

Racing

[edit]

Its turbocharged variant, 4G63T (also sometimes referred to simply as the 4G63), has powered Mitsubishi vehicles in World Rally Championships (WRC) for years in the Lancer EX 2000 Turbo, Galant VR-4, Lancer Evolution, Carisma GT, and Lancer WRC04. It was the powerplant of the Lancer Evolution when Tommi Mäkinen won his four consecutive WRC championships in his Lancer. MHI and T-4 turbos were both used as power for these engines. A 1.7L variant of the 4G63 was also used in a custom made hill-climb a DDR Motorsport DDR Grullón GT4 made by Komvet Racing.[4]

Applications

[edit]


Hyundai production - also called Hyundai Sirius engine


Chinese production

4G64 (2.4 liters)

[edit]

The 4G64 is the second largest variant, at 2,351 cc (2.4 L). Early models were 8-valve SOHC, but a later 16-valve SOHC and DOHC version was also produced. All used MPFI and had a bore and stroke of 86.5 mm × 100 mm (3.41 in × 3.94 in). The 4G64 was later also available with gasoline direct injection. Output varies between 155 hp (116 kW; 157 PS) at 5,250 rpm with 163 lb⋅ft (221 N⋅m) of torque at 4,000 rpm in the Mitsubishi L200 and 152 hp (113 kW; 154 PS) at 5,500 rpm with 163 lb⋅ft (221 N⋅m) of torque at 4,000 rpm in the Chrysler Sebring/Stratus. The Chrysler version features fracture-split forged powder metal connecting rods. The DOHC and SOHC 16-valve 4G64 are interference engines, while the SOHC 8-valve 4G64 is a non interference engine. From March 1996 an LPG version with 115 hp (86 kW; 117 PS) at 5,000 rpm was available in the Mitsubishi Canter.[3]

The 4G64 is a very popular engine in China, where it was used on the Changfeng Lièbào, a series of cars based on the Mitsubishi Pajero V20 from 2002 to 2021, and the Soueast Delica based on the Mitsubishi Delica van from 1996 to 2013. The 4G64 engine has been produced by Shenyang Aerospace Mitsubishi Motors Engine Manufacturing (SAME), in Shenyang, China where it was assembled through semi-knockdown kits in August 1998 and complete knockdown kits in September 1999. Regular assembling of the engines commenced in April 2000.[5] The Chinese market Ford Transit and its successor, the JMC Teshun use the 4G64 engine as a standard petrol option unlike the international third generation version which uses regular Ford engines.

Applications

[edit]

4G64T

[edit]

Turbocharged version of the 4G64.

4D65 (1.8 liter diesel)

[edit]

Known as the "Sirius Diesel", the 4D65 has the same dimensions as the 4G62 1,795 cc (1.8 L). It was available either naturally aspirated or turbocharged (with an air-to-air intercooler), and was used in most Mitsubishi diesel passenger cars in the eighties and beginning of the nineties. It was developed specifically to be transversally installed in front-wheel-drive cars, unlike the preceding 4D5-series which remained in production for commercial vehicles. The 1.8 TD power figures are comparable to those of the 22 percent larger, 2.3 liter 4D55, with more low-down torque and while being much smoother.[6] The cast-iron block was typical for Mitsubishi, but unusual for diesel engines, in being equipped with balance shafts.[7] A number of installations combined this engine with four-wheel-drive.

Applications

[edit]
4D65 (naturally aspirated)
4D65T (turbocharged)

4G67 (1.8 liters)

[edit]

The 16-valve DOHC 4G67 displaced 1,836 cc (1.8 L). Bore x Stroke: 81.5 mm × 88 mm (3.21 in × 3.46 in)

Applications

[edit]

4D68 (2.0 liter diesel)

[edit]
Mitsubishi 4D68 engine mounted in a 1998 Galant Station Wagon (Legnum)

Known as the "Sirius Diesel", the 4D68 version displaces 1,998 cc (2.0 L). It is fitted with a 93 mm (3.66 in) stroke crankshaft and the cylinder bore diameter is 82.7 mm (3.26 in). This engine uses pistons with a static compression ratio of 22.4:1 and piston pins are 25 mm (0.98 in) OD. It was available either naturally aspirated or turbocharged, and replaced the 4D65 as Mitsubishi's "go-to" diesel.

  • Type : Diesel engine
  • Number of cylinders: Inline 4
  • Combustion chamber: Swirl chamber
  • Lubrication system: Pressure feed, full-flow filtration
  • Oil pump type: External gear type
  • Cooling system: Water-cooled
  • Water pump type: Centrifugal impeller type
  • EGR type: Single type
  • Fuel system: Electronic control distributor-type injection pump
  • Supercharging: Turbocharger
  • Rocker arm: Roller type

Applications

[edit]

4G69 (2.4 liters)

[edit]
4G69 In Grandis

The 4G69 is a 2,378 cc (2.4 L) version built in Shiga, Japan and Shenyang, China. Bore and stroke is 87 mm × 100 mm (3.43 in × 3.94 in). Output is 120 kW (161 hp; 163 PS) at 5750 rpm (160 in the Sportback Wagon) with 219 N⋅m (162 lb⋅ft) of torque at 3500 rpm. It has a cast iron engine block (later switch to aluminum block) and an aluminum SOHC cylinder head. It uses multi-point fuel injection, has 4 valves per cylinder with roller followers and features forged steel connecting rods, a one-piece cast camshaft, and a cast aluminum intake manifold. The 4G69 incorporates Mitsubishi's MIVEC Variable Valve Timing technology.

Mitsubishi ceased any further development and production of Sirius engine after 2012 model year, and its Chinese joint-venture, Shenyang Aerospace Mitsubishi Motors Engine Manufacturing Co., is now the only one producing 4G69 engines. They are used by Chinese manufacturers only, but have been updated to use an aluminum block while adding a timing chain.

Applications

[edit]
NB: From 2005 a slightly detuned version developing 115 kW (154 hp; 156 PS) and 220 N⋅m (162 lbf⋅ft) is used across the entire Lancer range in Australia.

4G6A

[edit]

A SOHC 16 valve turbocharged engine similar to 4G63S4T, produced by SAME in Shenyang, China, utilizing a 4G63 shortblock destroked to a displacement of 1.8 L; 109.7 cu in (1,798 cc).[9]

  • Displacement: 1,798 cc
  • Bore × Stroke (mm): 85 × 79.2
  • Compression ratio: 9.4:1
  • Multi-point intake manifold injection
  • Turbocharger model: TD04
  • Peak power: 120 kW (161 hp; 163 PS)
  • Peak torque: 231 N⋅m (170 lb⋅ft) at 2,500 ~ 5,000 rpm
  • Minimum fuel consumption rate: 255 g/kw·h

4K1 series

[edit]

The 4K1 New MIVEC series is based on 4G6 shortblock but mated to a redesigned SOHC 16 valve head with VVL and MIVEC technology. Combustion chambers and piston surfaces were re-engineered to improve fuel economy by lowering friction. All 4K1 models are naturally aspirated and are currently produced by SAME in Shenyang, China.

4K10 (1.8 liters)

[edit]

Destroked 4G63 shortblock, same as 4G6A but with the new SOHC MIVEC head.

  • Displacement: 1,798 cc
  • Bore × Stroke (mm): 85 × 79.2
  • Compression ratio: 10.5:1
  • Multi-point intake manifold injection
  • Peak power: 100 kW (134 hp; 136 PS) at 6,000 rpm
  • Peak torque: 170 N⋅m (125 lb⋅ft) at 4,000 rpm
  • Minimum fuel consumption rate: 245 g/kw·h
  • No balance shaft

4K11 (2.0 liters)

[edit]

Utilized 4G63 shortblock.

  • Displacement: 1,997 cc
  • Bore × Stroke (mm): 85 × 88
  • Compression ratio: 10.5:1
  • Multi-point intake manifold injection
  • Peak power: 110 kW (148 hp; 150 PS) at 6,000 rpm
  • Peak torque: 190 N⋅m (140 lb⋅ft) at 4,000 rpm
  • Minimum fuel consumption rate: 245 g/kw·h
  • Optional balance shaft

4K12 (2.4 liters)

[edit]

Utilized 4G69 shortblock.

  • Displacement: 2,378 cc
  • Bore × Stroke (mm): 87 × 100
  • Compression ratio: 10.5:1
  • Multi-point intake manifold injection
  • Peak power: 120 kW (161 hp; 163 PS) at 6,000 rpm
  • Peak torque: 225 N⋅m (166 lb⋅ft) at 4,000 rpm
  • Minimum fuel consumption rate: 245 g/kw·h
  • Standard balance shaft

All 4K1 models are available for both longitudinal and transverse applications.

4K2 series

[edit]

In 2017, Mitsubishi launched a new series of gasoline inline-four engines called the 4K2 series. Originally consisting of three models, 4K20, 4K21 and 4K22, they are available in naturally aspirated as well as turbocharged versions.[10] This new design is based on the 4G6 shortblock, mated to a newly designed DOHC 16-valve head with MIVEC technology.

The 4K2 series is also produced by SAME in Shenyang, China.[11]

4K20

[edit]

Destroked 4G63 shortblock, same as 4G6A but with the new DOHC head. Only available as a turbocharged model (4K20D4T).

  • Displacement: 1,798 cc
  • Bore × Stroke (mm): 85 × 79.2
  • Compression ratio: 9.5:1
  • Multi-point intake manifold injection
  • Peak power: 128 kW (172 hp; 174 PS) at 5,500 rpm
  • Peak torque: 250 N⋅m (184 lb⋅ft) at 2,000 ~ 4,800 rpm
  • Minimum fuel consumption rate: 251 g/kw·h
  • Optional balance shaft
  • Transverse application only

4K21

[edit]

4G63 shortblock, available as a turbocharged model (4K21D4T) or two naturally aspirated models (4K21D4M & 4K21D4N)

  • Displacement: 1,997 cc (4K21D4T & 4K21D4M)
    2,019 cc (4K21D4N)
  • Bore × Stroke (mm): 85 × 88 (4K21D4T & 4K21D4M)
    85 × 89 (4K21D4N)
  • Compression ratio: 9.4:1 (4K21D4T)
    10.5:1 (4K21D4M & 4K21D4N)
  • Multi-point intake manifold injection
  • Peak power: 150 kW (201 hp; 204 PS) at 5,600 rpm (4K21D4T)
    110 kW (148 hp; 150 PS) at 6,000 rpm (4K21D4M)
    117 kW (157 hp; 159 PS) at 6,000 rpm (4K21D4N)
  • Peak torque: 280 N⋅m (207 lb⋅ft) at 2,000 ~ 4,800 rpm (4K21D4T)
    195 N⋅m (144 lb⋅ft) at 4,000 rpm (4K21D4M)
    201 N⋅m (148 lb⋅ft) at 4,000 rpm (4K21D4N)
  • Minimum fuel consumption rate: 250 g/kw·h (4K21D4T)
    242 g/kw·h (4K21S4M)
    244 g/kw·h (4K21D4N)
  • Optional balance shaft for naturally aspirated models (4K21D4M & 4K21D4N), standard on the turbocharged model (4K21D4T)
  • Longitudinal application only

4K22

[edit]

4G69 shortblock, available as a turbocharged model (4K22D4T) or a naturally aspirated model (4K22D4M)

  • Displacement: 2,378 cc
  • Bore × Stroke (mm): 87 × 100
  • Compression ratio: 9.6:1 (4K22D4T)
    10.5:1 (4K20D4M)
  • Multi-point intake manifold injection
  • Peak power: 160 kW (215 hp; 218 PS) at 5,600 rpm (4K22D4T)
    118 kW (158 hp; 160 PS) at 6,000 rpm (4K22D4M)
  • Peak torque: 320 N⋅m (236 lb⋅ft) at 2,400 ~ 4,000 rpm (4K22D4T)
    218 N⋅m (161 lb⋅ft) at 4,000 rpm (4K22D4M)
  • Standard balance shaft
  • Longitudinal application only

Applications

[edit]
  • Gwm steed 5 restyling 2021

4K3 series

[edit]

4K31

[edit]

In 2022, Mitsubishi (SAME in Shenyang, China) launched the new generation of in-Line 4 cylinder Turbo supercharged gasoline direct injection engine (TGDI). It also has six technologies, including variable displacement oil pump, double vortex turbocharger, intake and exhaust door timing variable, high compression ratio, lightweight design, mute technology, etc. It is more efficient and more fuel-efficient.

Displacement: 1,997 cc (4K31TD)

  • Bore × Stroke (mm): 85 × 88
  • Compression ratio: 10.5:1
  • Peak power: 168 KW (225 hp, 228 PS)
  • Peak torque: 360 N.m

Applications:

  • 2022 Zhengzhou Nissan Rich 7 (Pickup Ruiqi 7).
  • 2022 Zhengzhou Nissan Palaso/Palasso.
  • 2023 Zhengzhou Nissan New Paladin (based on Nissan Terra).

See also

[edit]
[edit]
Wikimedia Commons has media related to Toyota U engines.

References

[edit]
  1. ^ Yamaguchi, Jack K. (1985), Lösch, Annamaria (ed.), "Japan: Lucrative Contraction", World Cars 1985, Pelham, NY: The Automobile Club of Italy/Herald Books: 51, ISBN 0-910714-17-7
  2. ^ Mitsubishi Motors: Commercial Vehicle Range (brochure), Cirencester, Glos., UK: The Colt Car Company, 1989, p. 12
  3. ^ a b Takayoshi, Seiji (高吉 誠司), ed. (2011-03-17), "トラックメーカーアーカイブ vol.2: 三菱ふそうのすべて [Truck Manufacturer Archive Volume 2: Everything Mitsubishi Fuso]", Camion (in Japanese), no. 780, Tokyo, Japan: Geibun Mooks, p. 66, ISBN 978-4-86396-112-8
  4. ^ HillClimb Monsters (2019-05-01), DDR Motorsport DDR Grullón GT4 with 1.7L Turbo Mitsubishi Engine || 600Hp/710Kg Monster, archived from the original on 2019-05-14, retrieved 2019-05-13
  5. ^ "Press Release | Mitsubishi Motors Corporation". www.mitsubishi-motors.com. Archived from the original on 2020-10-21. Retrieved 2020-10-20.
  6. ^ De Leener, Philippe (1985-01-24). "Essai detaillé: Mitsubishi Galant 1.8 TD" [Detailed Test]. Le Moniteur de l'Automobile (in French). 36 (813). Brussels, Belgium: Editions Auto-Magazine: 123.
  7. ^ De Leener, p. 122
  8. ^ "2010 Great Wall X240 Manual 4x4". RedBook. Automotive Data Services Pty Ltd. Archived from the original on 2016-09-18.
  9. ^ 主要产品 [Main Products] (in Chinese). Shenyang Aerospace Mitsubishi Motors Engine Manufacturing Co. ltd. Archived from the original on 2020-07-11.
  10. ^ "【图】3.0L V6替代者 航天三菱2.4T发动机解析_汽车之家". Archived from the original on 2020-07-10. Retrieved 2020-07-10.
  11. ^ "国六皮卡爆款发动机 三菱4K22强在哪？_卡车之家". www.360che.com. Archived from the original on 2020-07-10. Retrieved 2020-07-10.
  12. ^ "Peugeot Landtrek enters the South American market".
Wikimedia Commons has media related to Mitsubishi 4G6 engines.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Mitsubishi_Sirius_engine&oldid=1254409516"